PSS-800 SS (Sludge Concentration ) - (MTI.WQMS.PBS.800TSS) Sensor is based on the method of combination of infrared absorption scattered light.e infrared light emitted by the light source is scattered by the suspended particles in the sample, and finally converted into an electrical signal by a photodetector, and the sludge concentration of the sample is obtained after analog and digital signal processing.
TSS Sensor (PSS-800)
• Measurement Range: 0,01-20000 mg/L, 0,01-45000 MG/L, 0,01-120000 MG/L
• Measurement accuracy: less than the ± 5% off measured value. (Depending on the homogeneity of sludge)
• Pressure range: ≤ 0,4 Mpa
• Flow Rate: ≤ 2.5 m/s, 8,2 ft /s
• Calibration: Sample Calibraton, Slope calibration
• Main material: Body SUS316L + PVC (Normal Version ) SUS316L titanizing + PVC (Sea Version): O- ring: fluoring rubber: cable: PVC
• Powe supply: 100-240VAC (50/60HZ)
• Output: 3- way 4-20mA
• Relay: Setting three - way relays programmed response parameter and response value
• Communication Protocol: MODBUS RS485
• Storage Temperature: -15-65 °C
• Operation Temperature: 0-45°C
• Dimensions - Sensor: Dia 60 mm*Length256mm - Transmitter : 145*125*162mm(L*W*H)
• Weight: Sensor 1.65kg: Transmitter: 1.35kg
• Protective rate: Sensor IP68/NEMA6P: Transmitter:IP65/NEMA4X
• Cable length: Standard 10m, the maximum may be extended to 100m