top of page
HPT607 Borehole 0~100m._Mertani_Mertani Istruments
AWLR Submersible HPT607 Borehole 0~100m (MTI.WL.SM.HK.607) is designed with a slim 19mm diameter body to enable it to fit small access ports, you can use it to measure liquid level and depth for water and waste water applications, at lift stations, ship- board, in-ground / above ground tanks and with inventory tank gauging. It provides repeatable, precision depth measurements under the most adverse conditions. These transducers utilize the U.S.A imported GE piezoresistive sensing element fitted into a 316L stainless steel housing with an integral welded 316 stainless steel barrier diaphragm. HPT607 water level sensor provides highly accurate water level measurement for a wide variety of applications, including those in severe environments. The submersible pressure transducer has a dynamic temperature compensation system, enabling high accuracy measurements over a wide temperature range. The water level sensor is easily adapted to all data loggers, telemetry, monitoring equipment, and displays. Holykell can provide a cost effective solution for level monitoring for a variety of applications. Welcome your inquiry.

AWLR Submersible HPT607 Borehole 0~100m.

SKU: MTI.WL.SM.HK.607

  • • Parameter: HPT607

    • Pressure Range: 0-0.2 Bar.....50 Bar / 0-2m...500m H2O Optional * 80m max for SDI-12 signal

    • Overload: 150% F.S

    • Burst Pressure: 500% F.S.

    • Accuracy ≤ ±0.5%F.S(Typical); ≤ ±0.25%F.S(by customized) @25 degree C

    • (Linearity Hysteresis Repeatability) Including non-lin., rep. and hys;Optional

    • Long-term Stability: 0.1%F.S±0.05%

    • Working Temp. -40-80°C(non-corrosive medium)

    • Storage Temp. -40°C~80°C(Nitrile rubber sealing ring); -20°C~80°C(fluororubber rubber sealing ring)

    • Temp. compensation 0°C~50°C

    • Medium compatible Compatible with 316L Stainless Steel

    • ElectricalWire 2 Wires 3 Wires 4 wires

    • Output: 4-20mA 0-5V;1-5V 0-10V;0.5-4.5V non-ratiometric;SDI-12;RS485 Modbus RTU

    • Power Supply: 7-30Vdc;8-30Vdc;13-30Vdc;5Vdc±5%;12Vdc 3.5-36Vdc

    • Life time: ≥1×10 8 pressure cycles

    • Zero Temp. Drift: 0.2%FS/°C(≤100kPa); 0.1%FS/°C(>100kPa)

    • FS Temp. Drift: 0.01%FS/°C(≤100kPa); 0.005%FS/°C(>100kPa)

    • Electrical connection: Fixed cable with vented tube and water proof IP68 (5 layer grade seal, water proof cover+2 grade rectangular ring + O-ring seal+sealant+ encapsulating compound)

    • Pressure mounting port: With stainless steel filter (Standard type)

    • Response time: ≤10ms

    • Pressure Type: Gauge pressure and absolute optional

    • Certificate: CE Certificate

    • EMC Standard: EN 61326-1:2013; EN 61326-2-3:2013;EN 61000-6-2:2005; EN61000-6-4:2007+A1

    • Remarks: Special request by customized

WhatsApp
bottom of page